Chapter 5 Troubleshooting
ID NO.
TITLE ERROR CONTENTS SOLUTION
0480 FILM IS
REMAINING
Film is remaining.
1. It started wrapping or feeding
the film with the film remaining
inside of the wrapper. Æ
Remove the film inside.
2. It misunderstood that the film is
remaining either because
film-detecting sensor is broken,
or some dirt is on the sensor.
ÆClean the sensor. If the error
still comes up after cleaning,
replace the sensor.
<SUB ERROR>
0100: When it tried to move, both
front and rear side
film-detecting sensors are
detecting the film.
0101: When it tried to move, the
front side film-detecting
sensor is detecting the film.
0102: When it tried to move, the rear
side film-detecting sensor is
detecting the film.
When film-detecting function is set
to OFF, this error will not happen.
[RETURN]
5-21
To Next Page
Loading...
Need help?
General
