isobus VT50 - Page 116

CCI.TECU – Operation
4.3.2.1 Copy tractor
To copy a tractor proceed as follows:
1. In the list of tractors select the tractor whose information is to be copied. To
do so, on the touchscreen press the button with the tractor name or turn the
scroll wheel until the button is highlighted in white and then press on the
scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK"
(F6) button.
 The context menu opens
2. Press on the "Copy" button on the touchscreen or turn the scroll wheel until
the button is highlighted in white and then press on the scroll wheel.
 A detailed view of the copied tractor is opened.
Note
The copy is identified by "Copy" after the tractor name.
4.3.2.2 Delete tractor
To delete a tractor proceed as follows:
1. In the list of tractors select the tractor whose information is to be deleted. To
do so, on the touchscreen press the button with the tractor name or turn the
scroll wheel until the button is highlighted in white and then press on the
scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK"
(F6) button.
 The context menu opens.
2. Press on the "Delete" button on the touchscreen or turn the scroll wheel until
the button is highlighted in white and then press on the scroll wheel.
 A warning opens.
3. Press the "OK" button on the touchscreen.
Note
The currently selected tractor (see chapter 4.2.1) cannot be deleted.
17