DAILY MCA2014 4x4 ‒ BODYBUILDER INSTRUCTIONS
ELECTRONIC SUB-SYSTEMS
5.2 BODYBUILDER CONNECTORS
15
– Printed 603.95.994 – 1 Ed. - Base 05/2015
230825
Figure 12
1. Outfitting 2. Connector 61071A
3. Connector 72075A
The B7 output supplies the signal relating to the speed according to [ISO16844-2].
Table 5.5 - Tachimetric signal characteristics
Function Parameter min max
Unit of
measurement
Remarks
Tachograph output B7
Voltage U
low
1.5 V I = 1 mA
Voltage U
high
5.5 V I = 1 mA
Frequency (1/T) 1.6 kHz Square wave
Pulse duration (t) 0.64 4 ms