Janome MB-7e - Replacing the Thread Tension Panel and Thread Catcher Panel

8
Replacing the Thread Tension Panel and Thread Catcher Panel
To remove:
1. Remove the setscrews A (2 pcs.) and thread tension
panel.
2. Loosen the setscrews B (3 pcs.)
3. Remove the setscrews C, thread catcher panel and
lower thread guide plate.
Setscrew A
Setscrew A
Thread tension panel
Thread tension panel
Setscrew B
Setscrew B
Setscrew C
Thread catcher panel
Lower thread guide plate