Janome MB-7e - Replacing the Thread Catcher Hook

26
Replacing the Thread Catcher Hook
To remove:
1. Remove the thread catcher unit (see page 25).
2. Loosen the setscrews (6 pcs.) and remove the thread
catcher guide.
3. Remove the thread catcher hook screw.
Remove the thread catcher hook.
To attach:
4. Attach the thread catcher hook with the thread catcher
hook screw.
5. Attach the thread catcher guide with the setscrews. (6
pcs.)
6. Attach the thread catcher unit (see page 25).
Setscrew
Thread catcher hook screw
Thread catcher hook
Thread catcher guide