Janome MB-7e - Replacing the Presser Foot Cam

19
Replacing the Presser Foot Cam (3)
7 Apply the grease to the groove of the presser foot cam.
* Recommended grease: MOLYKOTE (R) EM-30L.
8 Reverse the procedure to reinstall the parts.
Do not attach the covers yet.
9 Check the lowest position of the needle (refer to page
13 of service manual).
10 Adjust the position of the lateral moving unit (refer to
page 40 of service manual).
11 Attach the covers according to the procedures.
Replacing the Presser Foot Cam (3)
7. Apply the grease to the groove of the presser foot cam.
* Recommended grease: MOLYKOTE (R) EM-30L.
8. Reverse the procedure to reinstall the parts.
Do not attach the covers yet.
9. Check the lowest position of the needle (see page
13).
10. Adjust the position of the lateral moving unit (see
page 40).
11. Attach the covers according to the procedures.