1
CONTENTS
Replacing the Spool Stand ...........................................................................................
4
Replacing the Thread tension panel .............................................................................
4
Replacing the Head set right cover (unit) .....................................................................
5
To Replace Right Cover and Left Cover .......................................................................
6
Replacing the Base Cover and Bed Cover ...................................................................
7
Replacing the Thread Tension Panel and Thread Catcher Panel ................................
8
Checking the Thread Paths (1) .....................................................................................
9
Checking the Thread Paths (2) ...................................................................................
10
Replacing the Needle / Needle and Thread Reference Table ....................................
11
Adjusting the Bobbin Thread Tension .........................................................................
12
Checking the Lowest Position of the Needle ..............................................................
13
Replacing the Needle Bar Rest ..................................................................................
14
Replacing the Take-up Lever Cam Roller ...................................................................
15
Adjusting the Take up Lever Timing ............................................................................
16
Replacing the Presser Foot Cam ........................................................................
17 to 19
Replacing and Adjusting the Presser Foot (1) ............................................................
20
Replacing and Adjusting the Presser Foot (2) ............................................................
21
Replacing the Presser Foot Return Spring and Washer .....................................
22 to 24
Replacing the Thread Catcher ....................................................................................
25
Replacing the Thread Catcher Hook .........................................................................
26
To Next Page
Loading...
