7 Description of Connections
72 Jetter AG
*) is connected to the ground of the controller.
BRAKE + Braking
circuit
contact
BRAKE +
Contacts for the motor
brake
The internal semiconductor
switching device can be
operated either by the
control program or by the
firmware of the JetMove
D203 at release of the
motor current.
JetMove D203 is equipped
with an internal
freewheeling diode.
Contact: Type NO
These connections are only
for devices having got the
same reference to ground
as the power supply of the
logic.
This contact has
been connected
internally with the
brake supply.
BRAKE - Braking
circuit
contact
BRAKE -
The internal
semiconductor
switching device
closes the contact
BRAKE- by internal
ground.
Digital Inputs, Brake Terminals
Terminals
X72/X82
Signal Description Specification
To Next Page
Loading...
