EasyManua.ls Logo

JLG E600 - Page 20

JLG E600
222 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SECTION 1 - SPECIFICATIONS
1-6 – JLG Lift – 3121813
2. Generator Engine (If Equipped)
Lube Point(s) - Fill Cap
Capacity - Refer to Engine Manual
Lube - EO
Interval - 3 Months or 150 hours of operation
Comments - Check level daily/Change in accor-
dance with engine manual.
3. Hydraulic Tank
Lube Point(s) - Fill Cap
Capacity -
Prior to S/N 51941 - 15 gal. tank (56.7 L)
S/N 51941 to present - 15.9 gal. system (56.7L)
12.4 gal. (46.9 L) to Full Mark
Lube - HO
Interval - Check Level daily; Change every 2 years or
1200 hours of operation.
4. Hydraulic Filter
Interval - Change after first 50 hrs. and every 6
months or 300 hrs. thereafter or as indicated by
Condition Indicator.
Comments - Under certain conditions, it may be
necessary to replace the filter on a more frequent
basis.
5. Swing Drive Hub (S/N 58845 to Present)
Lube Point(s) - Level/Fill Plug
Capacity - 24 oz. (0.7 L)
Lube - EPGL
Interval - Check level every 3 months or 150 hrs of
operation; change every 2 years or 1200 hours of
operation
FILL
DRAIN

Table of Contents

Other manuals for JLG E600

Related product manuals