4
4.10 CHECK THE VIBRATORY SYSTEM PAG. 27
4.11 REPLACEMENT OF THE ALLOY VIBRATORY SYSTEM PAG. 28
4.12 CHECK AND REPLACEMENT OF TRANSDUCERS ON ALLOY VPM PAG. 28
4.13 CHECK AND REPLACEMENT OF ENCODER BOARD OF MAIN SHAFT PAG. 31
4.14 CHECK AND REPLACEMENT OF ENCODER BOARD OF POWER CLAMP PAG. 32
4.15 CHECK AND REPLACEMENT OF THE MOTOR PAG. 34
4.16 CHECK AND REPLACEMENT OF THE BELT PAG. 35
4.17 REPLACEMENT OF THE MECHANICAL BRAKE BOWDEN CABLE PAG. 36
4.18 REPLACEMENT OF THE SHAFT BRAKE BAND PAG. 37
4.19 CHECK AND REPLACEMENT OF THE POWER CLAMP
NUT AND TIE ROD PAG. 38
4.20 CHECK AND REPLACEMENT OF THE ELECTROMAGNETIC BRAKE PAG. 40
4.21 CHECK AND REPLACEMENT ELECTRIC/CLAMPING PEDAL SWITCH PAG. 41
4.22 CHECK AND REPLACEMENT DISTANCE POTENTIOMETER PAG. 43
4.23 CHECK AND REPLACEMENT OF DIAMETER POTENTIOMETER PAG. 44
4.24 CHECK AND REPLACEMENT OF THE WEIGHT LASER BOARD PAG. 45
4.25 LASER POINTER CHECK AND REPLACEMENT PAG. 46
4.26 CHECK AND REPLACEMENT HOOD SWITCH PAG. 47
4,27 WHEEL GUARD ADJUSTMENT PAG. 48
4.28 GAS SPRING: CHECK ADJUSTMENT AND REPLACEMENT PAG. 49
4.29 SONAR SENSOR: CHECK AND REPLACEMENT PAG. 50
CHAPTER 5 TROUBLE SHOOTING PAG. 52
5.1 INTRODUCTION PAG. 52
5.2 TO UPDATE SOFTWARE PAG. 52
5.3 IN THE FIELD REPROGRAMMING OF BALANCERS PAG. 53
5.4 IN THE FIELD CALIBRATION OF THE BALANCER PAG. 53
5.5 DIAGNOSTIC STEPS PAG. 54
5.6 “H” ERROR CODES PAG. 62
5.7 “E” ERROR CODES PAG. 63
5.8 “K” CODES (KERNEL CODES) PAG. 76
5.8.1 STRUCTURE OF AN ERROR CODE PAG. 76
5.8.2 PRIORITY ID PAG. 76
5.8.3 ERROR ID PAG. 76
5.9 ERROR CODES ON INTEGRATED IBP BOARD PAG. 80
5.9.1 STRUCTURE OF AN ERROR CODE PAG. 80
5.9.2 PRIORITY ID PAG. 80
5.9.3 ERROR ID PAG. 80
5.9.4 B- BEEPS OF THE INITIALISATION STEP PAG. 80
5.9.5 -C- BEEPS OF THE MODULE/OBJECT PAG. 81
5.9.6 -D- PAUSE BETWEEN THE CYCLES PAG. 81
CHAPTER 6 SERVICE CODES PAG. 82
6.1 INTRODUCTION PAG. 82
6.2 TABLE OF SERVICE CODES PAG. 82
6.3 ENTERING “C” CODES AND OPTION PAG. 83
6.4 SAVING SETTINGS FOR MODES OD OPERATION
AND CALIBRATION DATA PAG. 83
6.5 USER “C” CODES REFERENCE PAG. 84
6.6 SERVICE “C” CODES REFERENCE PAG. 88
UPDATING GUIDE PAG.116
To Next Page
Loading...