68
0X001032 VCC ABOVE LIMIT OF 5.2VDC
Check the power supply with C110.
If the problem still persists:
Check the IBP box
C Codes C110, C86, C115, C84, C88
0X001033 VCC BELOW LIMIT OF 5.2VDC
Check VCC connectors and cables
Check the power supply with C110.
If the problem still persists:
Check sonar sensor.
If the problem still persists:
Check the main shaft Optoencoder
If the problem still persists:
Check the IBP box
If the problem still persists:
Call Snap On
C Codes C110, C86, C115, C84, C88
0X001034
VOLT DISPLAY ABOVE LIMIT
Keyboard/display voltage above limit 5.35 VDC. Power supply problem. The microprocessor moni-
tors the voltages on all circuitry. Once the voltages are out of proper range, this diagnostic code is
generated.
Check power supply line
Replace the Integrated Panel
C Codes C55, C110
0X001035
VOLT DISPLAY BELOW LIMIT
Keyboard/display voltage below limit 5.00 VDC. Power supply problem. The microprocessor moni-
tors the voltages on all circuitry. Once the voltages are out of proper range, this diagnostic code is
generated.
Check power supply line
Check the main switch.
Check the cable and the connectors of the balancer
Replace the Integrated Panel
C Codes C55, C110
0X001036 LINE ABOVE LIMIT
Check the main power supply with C55.
If the problem still persists:
Check the Power supply to wall plug
If the problem still persists:
Check the main power supply cord and plug.
If the problem still persists:
Check the main switch.
If the problem still persists:
Check power supply cable and connectors inside of the machine.
If the problem still persists:
Call Snap On
C Codes C55
To Next Page
Loading...