JohnBean B 500 - Page 74

74
0X001081 NO ACCELERATION
Check wing nut
If the problem still persists:
Check the shaft.
If the problem still persists:
Check the wheel clamping.
If the problem still persists:
Check the belt adjustment.
If the problem still persists:
Check the belt.
If the problem still persists:
Check the brake adjustment.
If the problem still persists:
Check the motor connector and cable
If the problem still persists:
Check the motor pulley.
If the problem still persists:
Check the main shaft Optoencoder ! at cable
If the problem still persists:
Check the motor.
If the problem still persists:
Check the main shaft Optoencoder.
If the problem still persists:
Check the IBP box
If the problem still persists:
Call Snap On
C Codes C74, C54, C115, C84, C88
0X001082 SPEED LOW
Check wing nut
If the problem still persists:
Check the shaft.
If the problem still persists:
Check the wheel clamping.
If the problem still persists:
Check the belt adjustment.
If the problem still persists:
Check the belt.
If the problem still persists:
Check the brake adjustment.
If the problem still persists:
Check the motor connector and cable
If the problem still persists:
Check the motor pulley.
If the problem still persists:
Check the main shaft Optoencoder ! at cable
If the problem still persists:
Check the motor.
If the problem still persists:
Check the main shaft Optoencoder.
If the problem still persists:
Check the IBP box
If the problem still persists:
Call Snap On
C Codes C60, C74, C54, C115, C84, C88