89
C22 Unclamping of power clamp locked
Options:
0 * : Unclamping of power clamp device enabled
1 : Unclamping of power clamp device locked.
Special function: None
Description: The power clamp device is locked in clamped position.
Comments: The asterisk „*“ marks the factory-adjusted default.
C23 Enable/Disable power clamp
Options:
0 * : Unclamping of power clamp device enabled
1 : Unclamping of power clamp device locked.
Special function: None
Description: The power clamp device is locked in clamped position untill the balancing will be "OK".
Comments: The asterisk „*“ marks the factory-adjusted default.
C26 Change pedal functionality
Options:
0 * : Lift pedal to clamp/unclamp
1 : Depress pedal to clamp/unclamp
Special function: None
Description: Actuation of the power clamping device can be set to the preference of the operator. Locking the main
shaft is by moving the pedal in the opposite direction.
The chosen mode of operation can be transferred to the permanent memory.
Comments: The asterisk „*“ marks the factory-adjusted default.
C28 Display & clear error record
Options:
0 : Do not clear the error memory
1 : Clear the error memory.
Special function: none
Description: The last 10 different malfunction codes are written into the error memory so that they can be called
up and reported by the operator of the wheel balancer e.g. for remote diagnosis of malfunctions. The most recent
malfunction code is written into memory location 1 and the previous error codes are shifted to the higher memory
locations.
To Next Page
Loading...