4-18
4.5.4.3. STEP2 Selecting a screen structure
The screen structures of each display screen include customized screens that can be set freely, special
screens that do not allow any setting, and graphic screens.
Select a screen structure.
When display structure selection is set to “OFF”, the display screen cannot be registered.
Customized screen
One screen can be segmented into screens 1 to 4. Up to four contents can be displayed
concurrently.
Special screen and graphic screen
Users cannot change the screen structure. Special contents for the model are displayed on the
screen.
The following screen structures can be selected.
1) SEGMENTATION1: Full screen
2) SEGMENTATION2: The screen is segmented into two sections.
3) SEGMENTATION3: The screen is segmented into three sections.
4) SEGMENTATION4: The screen is segmented into four sections.
5) SPECIAL: Special screen for MID.
6) GRAPICH: Graphic screen
Select a screen
structure
Screen structure
Procedure
1. Select a display screen by referencing “STEP1”.
2. Select a screen structure from “SEGMENTATION1”, “SEGMENTATION2”, “SEGMENTATION3”,
“SEGMENTATION4”, “SPECIAL” and “GRAPHIC” by using
and press .
Select
SEGMENTATION1,
SEGMENTATION2,
SEGMENTATION3,
SEGMENTATION4,
SPECIAL,
GRAPHIC. or
OFF
or automatic
DISPLAY1
DISPLAY2
DISPLAY3
DISPLAY4
SPECIAL
GRAPHIC
Customized
screen
To Next Page
Loading...
