To Next PageTo Next PageWhat to do if JRC NWZ-4610 Marine Equipment has no reception from the sensor?
If your JRC Marine Equipment isn't receiving signals from the sensor, first check the connection cable to ensure it is properly connected. If the connection is secure, the sensor itself may be broken, and you should consult with JRC or their agents.
How to fix JRC NWZ-4610 when the dimmers are not interlocked?
If the dimmer on your JRC Marine Equipment isn't interlocked, verify that the RS-485 or Daisy-chain bit rate is correct (Daisy-chain is only for MID models), check that the dimmer group number is correct, and ensure the dimmer unit is correct. Also, check the RS-485 or Daisy-chain connection for any disconnections (Daisy-chain is only for MID models).
What to do if JRC NWZ-4610 Marine Equipment power does not turn on?
If your JRC Marine Equipment isn't powering on, first ensure the ship junction box is supplying power by checking the cabling. Also, if applicable, verify the power supply unit cabling is correctly connected (only MID models). If the cabling is fine, inspect and replace the fuse connected to the power cable or the power supply equipment fuse (only MID models) if blown. For LOG models, check the connection. If problems persist, the display unit switch may be broken, and you should consult with JRC or their agents.
What to do if the alarm sound is not generated on JRC Marine Equipment?
If the alarm sound is not generated on your JRC Marine Equipment, check the alarm sound setting to ensure it is not turned off. If the setting is correct, the buzzer may be broken.
Why are the dimmers not interlocked on my JRC NWZ-4610?
If the dimmers are not interlocked on your JRC Marine Equipment, check the RS-485 bit rate, ensure the dimmer group number is correct, and verify the dimmer unit. Also, make sure the cable is properly connected.
Why is data not being shared on my JRC Marine Equipment?
If data is not being shared on your JRC Marine Equipment, verify that the RS-485 bit rate is correct. Also, check that the RS-485 output sentence is selected, and confirm that the cable is properly connected.
What should I do if my JRC Marine Equipment is not receiving data from the sensor?
If your JRC Marine Equipment isn't receiving data from the sensor, check the connection cable to ensure it is properly connected. If the connection is secure, the sensor itself may be broken.
Why is there no transmission to external devices from my JRC NWZ-4610 Marine Equipment?
If your JRC Marine Equipment isn't transmitting to external devices, start by checking the interface settings to ensure the output settings are configured correctly and that the channel is correct. If the problem persists, the DISP-DPU or POWER SUPPLY UNIT may be broken.
General| Brand | JRC |
|---|---|
| Model | NWZ-4610 |
| Category | Marine Equipment |
| Language | English |
Details critical warnings for safe operation, covering electrical hazards and damage prevention.
Explains how to read and interpret various data displayed on the unit's screen.
Explains menu navigation, power on/off, screen adjustments, and basic operations.
Covers display settings like contrast, backlight, and system configurations like units and time.
Details how to configure various alarms, including system, speed, and environmental alarms.
Guides through installation setup, RS-485 communication, serial ports, and data sharing.
Offers solutions for identifying and resolving common operational problems and abnormalities.
Details how to connect various cables, data ports, and optional peripherals.
