JRC NWZ-4740 - Page 42

3-8
3.1.5 CDI Screen
The CDI screen can graphically display the CDI, course, speed, and leg.
The highway screen can be displayed by pressing and/or .
The highway screen displays information in Course Up mode while the own ship's position is
fixed, so the route turns when the own ship turns. As a result, the route may not be displayed
depending on the course.
The highway screen's scale can be changed by pressing or . The scale width is the
same as the plot screen's. Please refer to "4.3.3 Zooming the Screen In and Out".
When GC is selected as the distance calculation method, only one waypoint can be displayed.
CDI screen
Own ship's position
(latitude and longitude)
▼Bearing from the
own ship's position
to the waypoint
Δ
Course
Own ship symbol
Route deviation indicator bar
Width of the
port-side route
Width of the
starboard-side route
▼Planned ship speed
(Refer to "4.5 ROUTE
PLANNING
"
.)
Speed
Deviation from the route
Leg distance indicator bar
: Traveled distance
: Remaining distance
Time
Center of the route
Remaining distance
Highway screen
Deviation from the route
and the steering direction
: Steered to the left
: Steered to the right
Own ship's position
(latitude and longitude)
Time
Waypoint direction
Own ship symbol
Width of the
port-side route
Width of the
starboard-side route
Scale bar
Waypoint
LEG
Next leg
Up to 10 legs can be
displayed.
Next waypoint
Up to 10 waypoints can
be displayed.
Route
Distance from the own
ship's position to the
waypoint
Bearing from the own
ship's position to the
waypoint
Speed
Course
If the heading is input, and heading (HDG) is displayed.