– 124 –
(1) Communication method
①
Selecting the data format used for communication
<Information screen>
1. Select "1. Data communication" on the "in-
formation screen".
The "data communication list screen" is
displayed.
2. Select the transmitting/receiving data format
and press the selected data format button.
For example, select "1. EPD data transmis-
sion/reception".
The "data direction selection screen" is dis-
played.
<Data communication list screen>
②
Selecting the communication direction
Select the communication direction. Press
button
❶
to put the communication direction in
the selected state.
Press
❷
to conrm the setting.
The "data transmission/receipt preparation
screen" is displayed.
Cancel the operation with
❸
. The cur-
rent screen returns to the previous screen.
❶
<Data direction selection screen>
❸
❷
To Next Page
Loading...
