JUKI DDL-9000C-S Series - Page 100

3.Conrm the numeric value with ❾ to
start communication.
"During communication" screen is dis-
played while the communication is being
carried out.
Cancel the operation with ❽. The cur-
rent screen returns to the previous screen.
* If the destination number you have
entered has already been registered,
the "overwrite conrmation message"
screen will be displayed.
❾
❽
4. While a program is being written, the
screen of such a situation is displayed.
2)-2. When communication data is program data
1. After selection of data to communicate, the
program rewriting preparation screen is
displayed.
Press the program research key to change
program data that is being saved in the
USB memory.
2. After selection of the program data, press
the ❾ to start communication.
Press the ❽ to cancel operation,
and the current screen returns to the last
screen.
3. While a program is being written, the
screen of such a situation is displayed.
After such a writing of a program is com-
pleted, the screen giving you instructions
to turn off the sewing machine is displayed.
Turn off the machine.
4. When you turn on the sewing machine
again, the written program is executed.
❾
❽
② Select the program to rewrite, and start communication.
– 84 –