JUKI DDL-9000C-S Series - Page 99

② Selecting the data format used for communication
1. Select the transmitting/receiving data
format and press the selected data format
button.
For example, select "1. EPD data transmis-
sion/receipt".
The "data direction selection screen" is
displayed.
③ Selecting the communication direction
1. Select the communication direction. Press
button ❶ to put the communication direc-
tion in the selected state.
Press ❷ to conrm the setting.
The "data transmission/receipt preparation
screen" is displayed.
Cancel the operation with ❸. The cur-
rent screen returns to the previous screen.
❶ ❸
❷
2)-2. When communication data is other than program data
④ Setting the data number and starting communication
1. Press data number button❹.
The "data number input screen" is dis-
played.
❹
2. Enter the source/destination data number
with numeric keypad ❺ and
❻.
Press ❼ to conrm the setting.
The "data transmission/receipt preparation
screen" is displayed.
❼
❺
❻
– 83 –