39
3 Operation and visualization
Disk manager
Memory
alarm
At the configuration level, a percentage (residual capacity of diskette) can be
specified under Instrument data ➔ Memory alarm. When the residual capacity
of the inserted diskette reaches this percentage, the signal “Memory alarm” is
activated. It can, for instance, be used to operate a relay or to switch over to
event operation.
v Chapter 2.8 “Data storage”
Chapter 2.4 “Event traces”
Chapter 4 “Configuration parameters”
H
The function “Compl. measurement data ➔ Disk.” serves to sal-
vage data when the original diskette is no longer available.
Residual capacity of diskette in percent
Background flashes on error
e. g. “diskette full”, “no diskette”
Start action
The configuration data are read in from diskette
The configuration data are written to diskette
All measurement data in the memory are written to diskette.
Measurement data not yet saved are written to diskette
Select action
Counter/intergrator reporting periods are concluded and
written to diskette, together with the measurement data not
yet saved. Counter/integrators are reset (to 0) and restarted.
To Next Page
Loading...
