Jungheinrich EKS 110 User Manual

97
03.09 EN
7.1 Before taking the truck out of service
Procedure
• Clean the truck thoroughly.
• Test the brakes.
• Check the hydraulic oil level and replenish if necessary,
(see "Consumables" on page 88).
• Apply a thin layer of oil or grease to any non-painted mechanical components.
• Lubricate the truck according to the lubrication schedule, (see "Lubrication Sched-
ule" on page 86).
• Charge the battery, (see "Charging the battery" on page 26).
• Disconnect the battery, clean it and grease the terminals.
Z In addition, follow the battery manufacturer’s instructions.
• Spray all exposed electrical contacts with a suitable contact spray.
97
03.09 EN
7.1 Before taking the truck out of service
Procedure
• Clean the truck thoroughly.
• Test the brakes.
• Check the hydraulic oil level and replenish if necessary,
(see "Consumables" on page 88).
• Apply a thin layer of oil or grease to any non-painted mechanical components.
• Lubricate the truck according to the lubrication schedule, (see "Lubrication Sched-
ule" on page 86).
• Charge the battery, (see "Charging the battery" on page 26).
• Disconnect the battery, clean it and grease the terminals.
Z In addition, follow the battery manufacturer’s instructions.
• Spray all exposed electrical contacts with a suitable contact spray.

Jungheinrich EKS 110 Specifications

General

Brand	Jungheinrich
Model	EKS 110
Category	Trucks
Language	English