EasyManuals Logo

Jungheinrich EKS 110 User Manual

Jungheinrich EKS 110
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
55
03.09 EN
4.9 Adjusting the forks (o)
On trucks equipped with the fork carriage with adjustable and detachable forks op-
tion, the fork spread must be checked and adjusted if necessary before lifting loads.
Adjusting the forks
Procedure
Lift up the locking lever (30).
Push the forks (31) into the correct position on
the fork carriage (32).
Z To lift the load securely, the forks (31) must be
spread as far apart as possible and positioned
centrally with respect to the fork carriage. The
load centre of gravity must be centrally aligned
between the forks (31).
Lift the locking lever down (30) and move the
forks until the locking pin engages in a slot.
The forks are now adjusted.
30
31
32
55
03.09 EN
4.9 Adjusting the forks (o)
On trucks equipped with the fork carriage with adjustable and detachable forks op-
tion, the fork spread must be checked and adjusted if necessary before lifting loads.
Adjusting the forks
Procedure
Lift up the locking lever (30).
Push the forks (31) into the correct position on
the fork carriage (32).
Z To lift the load securely, the forks (31) must be
spread as far apart as possible and positioned
centrally with respect to the fork carriage. The
load centre of gravity must be centrally aligned
between the forks (31).
Lift the locking lever down (30) and move the
forks until the locking pin engages in a slot.
The forks are now adjusted.
30
31
32

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich EKS 110 and is the answer not in the manual?

Jungheinrich EKS 110 Specifications

General IconGeneral
BrandJungheinrich
ModelEKS 110
CategoryTrucks
LanguageEnglish

Related product manuals