93
03.09 EN
6.5 Electrical system
Exposing the electrical system
Procedure
• Open the battery panel, (see "Exposing the
battery" on page 25).
• Hold the top of the electrical system cover (9)
and pull it away from the truck until the top two
snap lock connections are disengaged.
• Remove the plug connector of the earth lead
(10) from the cover.
• Pull the cover (9) down off the truck until the
bottom snap lock connections are disengaged.
• Store the cover in a safe place.
The electrical system is now exposed and the
traction controller and truck fuses are accessible
for maintenance.
Closing the electrical system
Procedure
• Push the cover into the bottom snap connection until it engages.
• Connect the plug connector of the earth lead (10) to the cover.
• Push the cover (9) into the top snap connection until it engages.
• Close the battery cover.
The electrical system is now closed again.
1
2
3
9
1
93
03.09 EN
6.5 Electrical system
Exposing the electrical system
Procedure
• Open the battery panel, (see "Exposing the
battery" on page 25).
• Hold the top of the electrical system cover (9)
and pull it away from the truck until the top two
snap lock connections are disengaged.
• Remove the plug connector of the earth lead
(10) from the cover.
• Pull the cover (9) down off the truck until the
bottom snap lock connections are disengaged.
• Store the cover in a safe place.
The electrical system is now exposed and the
traction controller and truck fuses are accessible
for maintenance.
Closing the electrical system
Procedure
• Push the cover into the bottom snap connection until it engages.
• Connect the plug connector of the earth lead (10) to the cover.
• Push the cover (9) into the top snap connection until it engages.
• Close the battery cover.
The electrical system is now closed again.
1
2
3
9
1