To Next Page

To Previous Page

03.09 EN

Load aids may only be walked on if suitable safety devices such as pallet guard and

pallet tipover safety mechanisms are in place.

4.2 Emergency Disconnect, Travel, Steering, Braking

4.2.1 Emergency Disconnect

Applying the Emergency Disconnect

Procedure

• Press the Emergency Disconnect (19, 12, 22).

Z Do not use the Emergency Disconnect (19, 12, 22) as a service brake. The opera-

tion of the Emergency Disconnect (19, 12, 22) must not be affected by any objects

placed in its way.

All electrical functions are deactivated. The truck brakes until it comes to a halt.

4.2.2 Deadman button

Lifting (main lift) and auxiliary lift (o) can be applied without having to press the dead-

man button (27, 28).

If the deadman button (27, 28) is released during travel, the truck decelerates at the

maximum rate until it stops.

On trucks with a second control station (o) the deadman button (27, 28) acts as an

interlock. Only the controls on the side of the deadman button (27, 28) that was

pressed first will work.