Jungheinrich EKS 110 User Manual

67
03.09 EN
7.2 Parameters
The keypad enables parameters to be adjusted in programming mode.
Parameter Groups
The parameter number is composed of three digits. The first digit refers to the param-
eter group as shown in Table 1. The second and third digits are numbered in se-
quence from 00 to 99.
7.3 Parameter Settings
To change the truck settings you must enter the master code.
Z The master code factory setting is 7-2-9-5. Change the master code the first time
you use the truck.
Changing the truck settings
Procedure
• Press the63O key.
• Enter master code.
• Enter the three-digit parameter number.
• Confirm with SET key (64).
• Enter the setting as per parameter list.
Z If the entry is incorrect, the LED (65) of the O key (63) turns red.
• Enter the parameter number again.
• Enter the setting again or change it.
• Confirm with SET key (64).
• Repeat the procedure for other parameters.
• Then press the O key (63).
The settings are now saved.
No. Parameter Groups
0XX Code lock settings (codes, travel program release, automatic cutout, etc.)
67
03.09 EN
7.2 Parameters
The keypad enables parameters to be adjusted in programming mode.
Parameter Groups
The parameter number is composed of three digits. The first digit refers to the param-
eter group as shown in Table 1. The second and third digits are numbered in se-
quence from 00 to 99.
7.3 Parameter Settings
To change the truck settings you must enter the master code.
Z The master code factory setting is 7-2-9-5. Change the master code the first time
you use the truck.
Changing the truck settings
Procedure
• Press the63O key.
• Enter master code.
• Enter the three-digit parameter number.
• Confirm with SET key (64).
• Enter the setting as per parameter list.
Z If the entry is incorrect, the LED (65) of the O key (63) turns red.
• Enter the parameter number again.
• Enter the setting again or change it.
• Confirm with SET key (64).
• Repeat the procedure for other parameters.
• Then press the O key (63).
The settings are now saved.
No. Parameter Groups
0XX Code lock settings (codes, travel program release, automatic cutout, etc.)

Jungheinrich EKS 110 Specifications

General

Brand	Jungheinrich
Model	EKS 110
Category	Trucks
Language	English