To Next Page

To Previous Page

03.09 EN

agonal method)

4.5 EN norms

Noise emission level

– EKS 110: 61 dB(A)

in accordance with EN 12053 as harmonised with ISO 4871.

Z The noise emission level is calculated in accordance with standard procedures and

takes into account the noise level when travelling, lifting and when idle. The noise

level is measured at the level of the driver's ear.

Vibration

– EKS 110: 0,81 m/s²

in accordance with EN 13059

Z The vibration acceleration acting on the body in the operating position is, in accor-

dance with standard procedures, the linearly integrated, weighted acceleration in

the vertical direction. It is calculated when travelling over bumps at constant speed.

Electromagnetic compatibility (EMC)

The manufacturer confirms that the truck adheres to the limits for electromagnetic

emissions and resistance as well as the static electricity discharge test in accordance

with EN 12895 as well as the standardised instructions contained therein.

Z No changes to electric or electronic components or their arrangement may be made

without the written agreement of the manufacturer.

4.6 Application

Ambient temperature

– operating at 5°C bis 40°C

Z Special equipment and authorisation are required if the truck is to be constantly

used in conditions of extreme temperature or air humidity fluctuations.