To Next Page

To Previous Page

03.09 EN

Battery installation

Requirements

– Truck parked.

– Battery lock removed.

Tools and Material Required

– Crane or forklift truck

– Crane slings

– Battery replacement trolley (o)

Procedure

• Installing the battery with a crane or forklift truck

• Attach the hooks of the crane slings to the strap eyes (5) on the battery.

The discharged crane slings must not fall onto the battery cells.

• Slowly and carefully lower the battery into the truck.

• Installation with a battery replacement trolley

• Position the battery replacement trolley and battery in front of the battery com-

partment.

• Push the battery as far as the stop in the battery compartment.

• Insert the battery lock.

• Pull the clamping lever (6) of the battery lock 180° clockwise.

• Attach the battery connector (3) to the truck.

• Check all cables and plug connections for visible signs of damage.

• Close the battery cover.

When the battery has been installed the truck is ready for operation.