Jungheinrich EKS 110 User Manual

47
03.09 EN
Operator platform lowering
Procedure
• Press the lower button (2) until you reach the desired lift height.
Z On trucks with an auxiliary mast and FEM 2A forged forks, the operator platform
can only be lowered if the lower button (2) and the two-hand operation button (15)
are pressed simultaneously.
Note the order of operation: First press and hold down on the lower button (2), then
press the two-hand operation button (15). Every time the lower button (2) is re-
leased the two-hand operation button (15) must also be released.
23
15
47
03.09 EN
Operator platform lowering
Procedure
• Press the lower button (2) until you reach the desired lift height.
Z On trucks with an auxiliary mast and FEM 2A forged forks, the operator platform
can only be lowered if the lower button (2) and the two-hand operation button (15)
are pressed simultaneously.
Note the order of operation: First press and hold down on the lower button (2), then
press the two-hand operation button (15). Every time the lower button (2) is re-
leased the two-hand operation button (15) must also be released.
23
15

Jungheinrich EKS 110 Specifications

General

Brand	Jungheinrich
Model	EKS 110
Category	Trucks
Language	English