103
08.11 EN
Power On and Off
Procedure
• Turn on the fan switch (128) and
press the toggle switch (130) (green
indicator goes on)
• Airflow control with discharge jets
(131).
Using the air conditioning system at high air humidity and temperature levels
Procedure
• Turn on the fan switch (128).
• Press the toggle switch (130).
• Airflow control with discharge jets (131).
• Set the temperature control (129) according to the outside temperature.
• Open the rear sliding window by one notch.
• Close the window again after de-humidifying.
• Set the airflow as required.
Z The air conditioning system must be switched on at least once a month for approx.
10 minutes to recirculate the refrigerant.
When the air conditioning system is operating condensation water may be visible
underneath the truck.
Regular servicing of the air conditioning system is required to ensure it can work at
a consistently high level, (see "Servicing and Inspection" on page 123).
128
130
131
To Next Page
Loading...
Need help?
General
