EasyManuals Logo

Jungheinrich TFG 430 User Manual

Jungheinrich TFG 430
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
109
08.11 EN
6.17 Temperature control system
WARNING!
In each case the cause of the overheating must be established and rectified by a
trained and authorised customer service engineer.
The warning indicator (94) goes on and an
audible warning is sounded when the
permissible coolant temperature is
exceeded. The truck will only travel for
another 30 seconds, after which the drive is
automatically switched to neutral.
As soon as the permissible coolant
temperature is exceeded, proceed as
follows:
Procedure
Remove the truck from the hazardous
area if necessary,
Lower the fork carriage and load
securely.
Switch the drive to neutral and apply the
parking brake.
Run the motor at a slightly higher speed
(to improve the cooling effect of the fan)
until the temperature drops back to the
normal level.
Z If the temperature does not drop, park the
truck securely, switch the motor off and
have the truck examined.
Z In acutely hazardous situations, after the
30 second residual travel period, the truck
can be operated again for a further 30
seconds by switching off the ignition and
starting the engine again.
94
94

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich TFG 430 and is the answer not in the manual?

Jungheinrich TFG 430 Specifications

General IconGeneral
BrandJungheinrich
ModelTFG 430
CategoryForklifts
LanguageEnglish

Related product manuals