EasyManuals Logo

Jungheinrich TFG 430 User Manual

Jungheinrich TFG 430
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
139
08.11 EN
5.2 Customer Service
5.2.1 Standard equipment
Brakes W A B C
Test brakes. t
Check brake lining. t
Check brake fluid level in the compensation tank and top up if
necessary.
t
Check connections and lines for leaks. t
Check brake mechanism, adjust and lubricate if necessary. t
Note:
Replace brake fluid after 2000 service hours or every two years.
Bleed the brake system.
Check water component of brake fluid and replace if necessary. t
Electrical System W A B C
Test displays and controls. t
Test warning and safety devices in accordance with operating
instructions.
t
Check fuse ratings. t
Check electric wiring for damage [insulation damage, connections].
Make sure wire connections are secure.
t
Test micro switch and adjust if necessary. t
Check contactors and/or relays. t
Test panel switch and check for damage. t
Power Supply W A B C
Check battery and battery components. t
Check battery cable connections are secure, grease terminals if
necessary.
t
Check exhaust levels and adjust if necessary. t
Test LPG system and check for leaks and damage. t
Replace the LPG filter. t
Check battery voltage. t
Note:
The LPG system may only be inspected by LPG system experts.
Travel W A B C
Check valve setting and adjust if necessary. t
Replace the spark plugs. t
Check V belt / multi-V belt is tensioned and check for damage. t
Test exhaust system and check for leaks and damage. t
Check coolant level and top up if necessary. t

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich TFG 430 and is the answer not in the manual?

Jungheinrich TFG 430 Specifications

General IconGeneral
BrandJungheinrich
ModelTFG 430
CategoryForklifts
LanguageEnglish

Related product manuals