19
08.11 EN
3 Technical Specifications
All technical details refer to standard trucks.
Values indicated with *) may vary, depending on the
types of equipment used (e.g. mast, cabin, tyres etc.).
Z Technical data specified in accordance with VDI 2198.
Technical modifications and additions reserved.
3.1 Performance data
1)
for vertical mast.
2)
The values shown represent the maximum gradeability to overcome short
differences in height and surface unevenness (surface edges). The truck must not
operate on inclines of more than 15%.
DFG 316/320
Description DFG 316 DFG 320
Q
C ap ac i ty
where C = 500 mm)
1)
1600 2000 kg
C Load centre distance 500 500 mm
Travel speed* with /
without load
18.3/19.1 18.0/18.8 km/h
Lift speed, with / without
load
0.61/0.62 0.60/0.62 m/s
Lowering speed with /
without load
0.55/0.49 0.57/0.49 m/s
Gradeability
2)
*
with / without load
23 20 %
Acceleration* with /
without load to 15 m
5.2/4.6 5.4/4.8 s
Available working
pressure for attachments
160 160 bar
Oil flow for attachments 45 45 l/min
To Next Page
Loading...
Need help?
General
