EasyManuals Logo

Jungheinrich TFG 430 User Manual

Jungheinrich TFG 430
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
117
08.11 EN
F Industrial Truck Maintenance
1 Operational Safety and Environmental Protection
The checks and servicing operations contained in this chapter must be performed in
accordance with the intervals as indicated in the servicing checklists.
WARNING!
Risk of accidents and damage to components
Any modification to the truck, in particular the safety mechanisms, is prohibited. Do
not alter the truck's operating speeds under any circumstances.
Do not bond the front window with adhesive.
Exception: Owners should only make changes or have changes made to powered
industrial trucks if the truck manufacturer is no longer operating in the field and there
is no successor to the business; owners must however:
Ensure that the changes to be made are planned, tested and performed by a
specialist engineer in industrial trucks taking safety into account.
keep permanent graphic records of the plans, tests and completion of the changes
carry out and have authorised the respective changes to the capacity data plates,
decals and stickers as well as the operator and service manuals.
attach permanent and clearly visible marking to the truck indicating the types of
changes made, the date of the changes and the name and address of the
organisation responsible for the work.
NOTE
Only original spare parts have been certified by our quality assurance department. To
ensure safe and reliable operation of the truck, use only the manufacturer's spare
parts.
For safety reasons, only components which have been specially agreed by the
manufacturer for this truck may be installed near the computer, controllers and wire
guidance sensors (antennae). These components (computers, controllers, wire
guidance sensors (antennae)) must therefore not be replaced either by similar
components from other trucks of the same series.
Z On completion of inspection and service work, carry out the operations listed in the
“Recommissioning the truck after cleaning or maintenance work” section ((see
"Restoring the truck to service after maintenance and repairs" on page 181)).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich TFG 430 and is the answer not in the manual?

Jungheinrich TFG 430 Specifications

General IconGeneral
BrandJungheinrich
ModelTFG 430
CategoryForklifts
LanguageEnglish

Related product manuals