08.11 EN
118
2 Maintenance Safety Regulations
Maintenance and repair personnel
Truck maintenance and repair work must only be carried out by specially trained
personnel. A maintenance contract with the manufacturer will ensure trouble-free
operation. The manufacturer’s service department has customer service technicians
specially trained for these tasks.
Lifting and jacking up
WARNING!
Lifting and jacking up the truck safely
In order to raise the truck, the lifting gear must only be secured to the points specially
provided for this purpose.
You may only work under a raised load handler / raised cab if they have been secured
with a sufficiently strong chain or the fastening bolt.
In order to raise and jack up the truck safely, proceed as follows:
XJack up the truck only on a level surface and prevent it from moving accidentally.
XOnly use a jack with sufficient capacity. When jacking up the truck, take appropriate
measures to prevent it from slipping or tipping over (e.g. wedges, wooden blocks).
XIn order to raise the truck, the lifting gear must only be secured to the points
specially provided for this purpose. (see "Identification points and data plates" on
page 33).
XWhen jacking up the truck, take appropriate measures to prevent it from slipping or
tipping over (e.g. wedges, wooden blocks).
To Next Page
Loading...
Need help?
General
