127
08.11 EN
4.2 Customer Service
4.2.1 Standard equipment
Brakes W A B C
Test brakes. t
Check brake lining. t
Check brake fluid level in the compensation tank and top up if
necessary.
t
Check connections and lines for leaks. t
Check brake mechanism, adjust and lubricate if necessary. t
Note:
Replace brake fluid after 2000 service hours or every two years.
Bleed the brake system.
Check water component of brake fluid and replace if necessary. t
Electrical System W A B C
Test displays and controls. t
Test warning and safety devices in accordance with operating
instructions.
t
Check fuse ratings. t
Check electric wiring for damage [insulation damage, connections].
Make sure wire connections are secure.
t
Test micro switch and adjust if necessary. t
Check contactors and/or relays. t
Test panel switch and check for damage. t
Power Supply W A B C
Check battery and battery components. t
Check battery cable connections are secure, grease terminals if
necessary.
t
Check battery voltage. t
Check fuel system, tank and lines for leaks and damage. t
Travel W A B C
Check valve setting and adjust if necessary. t
Check V belt / multi-V belt is tensioned and check for damage. t
Test exhaust system and check for leaks and damage. t
Check coolant level and top up if necessary. t
Test anti-freeze, top up if necessary. t
Check engine suspension. t
Check transmission for noise and leakage. t
Check transmission oil level or grease filling of the transmission and
top up if necessary.
t
To Next Page
Loading...
Need help?
General
