155
08.11 EN
7.3 Unlocking the engine bonnet
Unlocking the engine bonnet
Requirements
– For trucks with a closed cab open both cabin
doors before lifting the engine cover (o).
Procedure
• Unlock the steering column with the steering
column adjustment lever (154) and push it
forward fully.
• Push the driver's seat forward and lock it in
place (see (see "Adjusting the driver’s seat"
on page 64)).
• Press the pushbutton in the legroom until the
engine cover (10) is unlocked.
• Lift up the engine cover (10) fully. A gas pressure damper keeps the engine cover
in the raised position.
The engine cover is now slightly open.
Closing the engine cover
Procedure
• Raise the engine cover slightly and
push the bottom section (155) of the
gas pressure damper in the direction
of the arrow as far as it will go against
the top part of the gas pressure
damper.
• Push the engine cover down and allow
it to lock in place. Push the driver`s
seat back and lock it in place.
• To adjust the seating position and
steering wheel position to your
requirements, (see "Setting up the
operator position" on page 64).
154
10
155
To Next Page
Loading...
Need help?
General
