08.11 EN
156
7.4 Checking the wheel attachments.
WARNING!
Using different tyres can cause accidents
The quality of tyres affects the stability and performance of the truck.
XThe diameter of the wheels must differ by no more than 15 mm.
XAlways replace tyres in pairs. After replacing the tyres check the wheel nuts are
secure after 10 service hours.
XAlways use tyres of the same make, model and profile.
Checking the wheel attachment
Requirements
– Prepare the truck for maintenance and
repairs ((see "Preparing the truck for
maintenance and repairs" on page 154)).
Tools and Material Required
– Torque wrench
Procedure
• Torque the wheel nuts (156) crosswise with
a torque wrench, for torques (see "Tyre
type" on page 29).
The wheel attachment is now checked.
Z When using pneumatic tyres check the air pressure, for the air pressure (see "Tyre
type" on page 29)
156
To Next Page
Loading...
Need help?
General
