08.11 EN
18
Drive system
A power shift gear with radiator and torque converter transfers the force to the drive
axle (8).
The travel direction switch on the left hydraulic control lever regulates forward/reverse
travel and the neutral position.
Brakes
The brake pedal actuates two drum brakes which are applied to the drive wheels. An
additional slow travel / brake pedal facilitates creep speed applications. The pedal
should not be used for normal braking purposes. Worn drum brakes are automatically
adjusted. The parking brake operates through mechanical actuation of the parking
brake lever on the drum brake via Bowden cables.
Hydraulic system
A multi-pilot valve allows for sensitive operation of the functions via the controls. A
speed-controlled hydraulic pump ensures a proportionate and efficient supply to the
hydraulic functions.
Mast
Two or three-stage masts, optionally with free lift function; narrow mast sections
ensure excellent visibility of the forks and attachments. Fork carriage and mast run
on permanently lubricated and hence maintenance-free support rollers.
Attachments
The trucks can be optionally fitted with mechanical and hydraulic attachments.
To Next Page
Loading...
Need help?
General
