143
08.11 EN
Electrical optional equipment
Overhead guard cover
Fire extinguisher
Belt lock control
Heating
Clamping device
Electrical System W A B C
Test electrical optional equipment and check for damage. t
Chassis and superstructure W A B C
Check overhead guard cover is present, check for damage and
make sure it is secure.
t
Agreed performance levels W A B C
Check fire extinguisher is present, secure and Check test interval. t
Chassis and superstructure W A B C
Test belt lock control and check for damage. t
Chassis and superstructure W A B C
Check hoses for leaks and damage and make sure they are secure. t
Test heating. t
Replace heating breather. t
Hydraulic operations W A B C
Attachment:
Clean and lubricate.
t
Check hydraulic ports and tighten if necessary. t
Check axial play of the front and rear rollers and adjust if necessary. t
Check sliding blocks are complete. t
Check cylinder seals. t
Test operation and setting of the attachment.
Check attachment for damage.
t
Check cylinder piston rods and bushings. t
Test acknowledgement key. t
Attachment:
check bearing points, guides and stops for wear and damage,
grease and clean these components.
t
Test hose reel and check for leaks and damage. t
Check attachment is properly secured to the truck and the
supporting elements.
t
To Next Page
Loading...
Need help?
General
