Locating the Chassis Serial Number ID Label on an MX150
The serial number ID label is located on the back of the chassis on an MX150. See
Figure 24 on page 111.
Figure 24: Location of the Serial Number ID Label on an MX150
Related
Documentation
Contacting Customer Support to Obtain a Return Materials Authorization for an MX150
on page 113
•
Packing a MX150 Router or Component for Shipping
If you are returning a MX150 router or component to Juniper Networks for repair or
replacement, pack the item as described in this topic.
Before you pack a MX150 router or component:
•
Ensure that you have taken the necessary precautions to prevent electrostatic discharge
(ESD) damage. See “Prevention of Electrostatic Discharge Damage” on page 151.
•
Retrieve the original shipping carton and packing materials. Contact your JTAC
representative if you do not have these materials, to learn about approved packing
materials. See “Contacting Customer Support to Obtain a Return MaterialsAuthorization
for an MX150” on page 113.
Ensure that you have the following parts and tools available:
•
ESD grounding strap.
•
Antistatic bag, one for each component.
•
If you are returning the chassis, an appropriate screwdriver for the mounting screws
used on your rack or cabinet.
This topic describes:
•
Packing an MX150 for Shipping on page 111
•
Packing MX150 Components for Shipping on page 112
Packing an MX150 for Shipping
To pack an MX150 for shipping:
111Copyright © 2017, Juniper Networks, Inc.
Chapter 17: Contacting Customer Support and Returning the Chassis or Components
To Next Page
Loading...
