Juniper MX150 - SFP+ Direct Attach Copper Cables for MX150

Table 22: Optical Interface Support for Gigabit Ethernet SFP+ Transceivers in MX150
Devices (continued)
ValueSpecificationEthernet Standard
EX-SFP-10GE-ZRModel number10GBASE-ZR
10 GbpsRate
LCConnector type
DualFiber count
1550 nmTransmitter wavelength
0 dBmMinimum launch power
5 dBmMaximum launch power
–20 dBmMinimum receiver sensitivity
–8 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
80 kmDistance
AvailableDOM support
Junos OS Release 17.3R1 or laterSoftware required
YesSupport for Virtual Chassis
configuration
Related
Documentation
Front Panel of an MX150 on page 5•
• Installing a Transceiver in an MX150 on page 103
• Removing a Transceiver from an MX150 on page 101
SFP+ Direct Attach Copper Cables for MX150
Small form-factor pluggable plus transceiver (SFP+) direct attach copper (DAC) cables,
also known as Twinax cables, are suitable for in-rack connections between servers and
switches. They are suitable for short distances of up to 23 ft, making them ideal for highly
cost-effective networking connectivity within a rack and between adjacent racks.
Copyright © 2017, Juniper Networks, Inc.62
MX150 3D Universal Edge Router Hardware Guide