CHAPTER 9
Unpacking the MX150
•
Unpacking an MX150 on page 73
•
Parts Inventory (Packing List) for an MX150 on page 73
•
Registering Products—Mandatory for Validating SLAs on page 74
Unpacking an MX150
The MX150 is shipped in a cardboard carton, secured with foam packing material. The
carton has an accessory compartment and contains the quick start instructions.
CAUTION: The MX150 is maximally protected inside the shipping carton. Do
not unpack the devices until you are ready to begin installation.
To unpack the device:
1. Open the carton.
2. Pull out the packing material holding the device in place.
3. Verify the parts received against the inventory on the label attached to the carton.
See “Parts Inventory (Packing List) for an MX150” on page 73.
4. Save the shipping carton and packing materials in case you need to move or ship the
switch later.
Related
Documentation
Configuring the MX150 on page 93•
Parts Inventory (Packing List) for an MX150
The MX150 is shipped in a cardboard carton, secured with foam packing material. The
carton contains an accessory box.
73Copyright © 2017, Juniper Networks, Inc.