The device shipment includes a packing list. Check the parts you receive in the device
shipping carton against the items on the packing list. The parts shipped depend on the
configuration you order.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper customer care from within the U.S. or Canada by telephone at
1-888-314-5822. For international-dial or direct-dial options in countries without toll-free
numbers, see http://www.juniper.net/support/requesting-support.html.
Table 26 on page 74 lists the parts and their quantities in the packing list.
Table 26: Packing List for an MX150
QuantityComponent
1Device
1AC power cord appropriate for your geographical location
1AC power cord retainer clip
2Mounting brackets
8Mounting screws to attach the mounting brackets to the device chassis
4Rubber feet
1RJ-45 cable and RJ-45 to DB-9 serial port adapter
1Quick Start installation instructions
1Juniper Networks Product Warranty
1End User License Agreement
NOTE: You must provide mounting screws that are appropriate for your rack
or cabinet to mount the chassis on a rack or a cabinet.
Related
Documentation
MX150 Router Overview on page 3•
Registering Products—Mandatory for Validating SLAs
Register all new Juniper Networks hardware products and changes to an existing installed
product using the Juniper Networks website to activate your hardware replacement
service-level agreements (SLAs).
Copyright © 2017, Juniper Networks, Inc.74
MX150 3D Universal Edge Router Hardware Guide