CHAPTER 6
Power Specifications and Requirements
•
AC Power Supply Specifications for an MX150 on page 27
•
AC Power Cord Specifications for an MX150 on page 27
AC Power Supply Specifications for an MX150
Table 14 on page 27 describes the AC power specifications for an MX150.
Table 14: AC Power Specifications for an MX150
SpecificationItem
Operating range:
•
100 through 240 VAC
AC input voltage
50–60 Hz nominalAC input line frequency
3 A at 240 VACAC input current rating
140 WMaximum power consumption
Related
Documentation
AC Power Cord Specifications for an MX150 on page 27•
• General Safety Guidelines and Warnings on page 121
• General Electrical Safety Guidelines and Warnings on page 149
AC Power Cord Specifications for an MX150
A detachable AC power cord is supplied with the AC power supplies. The coupler is type
C13 as described by International Electrotechnical Commission (IEC) standard 60320.
The plug at the male end of the power cord fits into the power source outlet that is
standard for your geographical location.
CAUTION: The AC power cord provided with each power supply is intended
for use with that power supply only and not for any other use.
27Copyright © 2017, Juniper Networks, Inc.