Juniper SRX110 H2 User Manual

Routing Engine REV 01 650-035910 AX0021AF0037 RE-SRX110H-VA
FPC 0 FPC
PIC 0 8x FE Base PIC
FPC 1 FPC
PIC 0 Internal VDSL2/ADSL-POTS
Power Supply 0
show chassis environment
user@host > show chassis environment
Class Item Status Measurement
Temp Routing Engine OK 64 degrees C / 147 degrees F
Routing Engine CPU Absent
Power Power Supply 0 OK
show chassis fpc
user@host >show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online -------------------- CPU less FPC --------------------
1 Online -------------------- CPU less FPC --------------------
show chassis alarms
user@host >show chassis alarms
No alarms currently active
Related
Documentation
Monitoring the SRX110 Services Gateway Using Chassis Alarm Conditions on page 112•
• Monitoring the SRX110 Services Gateway Components Using LEDs on page 110
• Monitoring the SRX110 Services Gateway Power System on page 114
• Maintaining the SRX110 Services Gateway Hardware Components on page 107
Monitoring the SRX110 Services Gateway Components Using LEDs
You can monitor the chassis condition by using the LEDs. Table 45 on page 111 lists the
LEDs, their condition, the possible causes and corrective actions.
Copyright © 2015, Juniper Networks, Inc.110
SRX110 Services Gateway Hardware Guide for H2 Model Numbers

Juniper SRX110 H2 Specifications

General

Form Factor	Desktop
VPN Throughput	65 Mbps
Maximum Concurrent Sessions	16, 000
Memory	1 GB DRAM
Flash Memory	256 MB
Power Supply	External AC adapter
Humidity	10% to 90% non-condensing
Weight	2.5 lbs
Operating Temperature	32°F to 104°F (0°C to 40°C)
Ports	8 x 10/100/1000BASE-T