Juniper SRX110 H2 - Chapter 23 Electrical Safety Guidelines and Warnings; SRX110 Services Gateway Electrical Safety Guidelines and Warnings; Electrical Safety Guidelines and Warnings In Case of Electrical Accident; General Electrical Safety Guidelines and Warnings

SRX110 Services Gateway Safety Requirements, Warnings, and Guidelines
To avoid harm to yourself or the device as you install and maintain it, follow the guidelines
for working with and near electrical equipment, as well as the safety procedures for
working with devices. For a discussion of how to make the installation site a safe
environment and a list of safety warnings, see “SRX110 Services Gateway Definition of
Safety Warning Levels” on page 129.
NOTE: Providing an exhaustive set of guidelines for working with electrical
equipment is beyond the scope of this guide.
Related
Documentation
• General Site Guidelines for Installing the SRX110 Services Gateway on page 30
• Required Tools and Parts for Installing and Maintaining the SRX110 Services Gateway
on page 48
• Preparing the SRX110 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation
135Copyright © 2015, Juniper Networks, Inc.
Chapter 18: General Safety Guidelines and Warnings