SRX110 Services Gateway Power Specifications and Requirements
The AC power system electrical specifications for the SRX110 Services Gateway are listed
in Table 21 on page 39.
Table 21: Power Supply Electrical Specifications for the SRX110 Services
Gateway
SpecificationPower Requirement
100 to 240 VACAC input voltage
50 to 60 HzAC input line frequency
1.5 A maximumAC system current rating
WARNING: The AC power cord for the services gateway is intended for use
with the device only and not for any other use.
Related
Documentation
• SRX110 Services Gateway Electrical Safety Guidelines and Warnings on page 155
• SRX110 Services Gateway Power Supply on page 9
• SRX110 Services Gateway Grounding Specifications on page 71
39Copyright © 2015, Juniper Networks, Inc.
Chapter 5: Power Requirements and Specifications
To Next Page
Loading...
