EasyManuals Logo

Juniper SRX110 H2 User Manual

Juniper SRX110 H2
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
CHAPTER 2
Hardware Component Overview
SRX110 Services Gateway Power Supply on page 9
SRX110 Services Gateway 3G USB Modem Overview on page 10
SRX110 Services Gateway 3G USB Modem Key Features on page 12
SRX110 Services Gateway Power Supply
The power supply for the SRX110 Services Gateway is external. You must use the power
supply adapter provided by Juniper Networks to provide power to the services gateway.
Figure 1 on page 9 shows the label for the 12 V power supply.
Figure 1: SRX110 Services Gateway 12 V Power Supply
g033607
Related
Documentation
Monitoring the SRX110 Services Gateway Power System on page 114
Powering On the SRX110 Services Gateway on page 80
Powering Off the SRX110 Services Gateway on page 81
9Copyright © 2015, Juniper Networks, Inc.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper SRX110 H2 and is the answer not in the manual?

Juniper SRX110 H2 Specifications

General IconGeneral
Form FactorDesktop
VPN Throughput65 Mbps
Maximum Concurrent Sessions16, 000
Memory1 GB DRAM
Flash Memory256 MB
Power SupplyExternal AC adapter
Humidity10% to 90% non-condensing
Weight2.5 lbs
Operating Temperature32°F to 104°F (0°C to 40°C)
Ports8 x 10/100/1000BASE-T

Related product manuals