Juniper SRX110 H2 - Page 176

•
Never assume that power is disconnected from a circuit. Always check the circuit before
starting to work.
•
Carefully look for possible hazards in your work area, such as moist floors, ungrounded
power extension cords, and missing safety grounds.
•
Operate the services gateway within marked electrical ratings and product usage
instructions.
•
For the services gateway and peripheral equipment to function safely and correctly,
use the cables and connectors specified for the attached peripheral equipment, and
make certain they are in good condition.
Related
Documentation
• SRX110 Services Gateway Power Specifications and Requirements on page 39
• SRX110 Services Gateway Maintenance and Operational Safety Guidelines and Warnings
on page 149
• Grounding the SRX110 Services Gateway on page 72
• SRX110 Services Gateway Agency Approvals on page 157
Copyright © 2015, Juniper Networks, Inc.156
SRX110 Services Gateway Hardware Guide for H2 Model Numbers