Juniper SRX110 H2 - Page 78

Table 33: SRX110 Services Gateway Preinstallation Checklist for
Wall-Mount Installation (continued)
Additional InformationTask
Verify that you have the following parts available in your
wall-mounting kit to mount the SRX110 Services
Gateway on a wall:
•
Wall-mounting brackets
•
Screws
NOTE: The wall-mounting kit is not shipped with the device and must be
ordered separately.
Related
Documentation
• Unpacking the SRX110 Services Gateway on page 51
• Clearance Requirements for Airflow and Hardware Maintenance of the SRX110 Services
Gateway on page 34
• Preparing the SRX110 Services Gateway for Rack-Mount Installation on page 55
• Preparing the SRX110 Services Gateway for Desk-Mount Installation on page 56
Copyright © 2015, Juniper Networks, Inc.58
SRX110 Services Gateway Hardware Guide for H2 Model Numbers